5.8GHz Microwave Radar Motion Sensor Switch, Multi-Mount 360°/180°, 1-8m, 300W, Adjustable Delay, AC 220-240V

About this product

Specifications

Questions about this product

What is the 5.8GHz Microwave Radar Motion Sensor Switch, Multi-Mount 360°/180°, 1-8m, 300W, Adjustable Delay, AC 220-240V?

5.8GHz Microwave Radar Motion Sensor Switch – Multi-Mount 360°/180° The QS/M5B-ST/WB Microwave Radar Motion Sensor Switch is an automatic energy-saving lighting controller that uses 5.8GHz CW microwave radar technology to detect human movement and automatically switch the connected lighting load. The sensor supports both 360° ceiling-mounted detection and 180° wall-mounted detection . Its detection distance is adjustable from 3 to 10 metres radius , allowing the sensing area to be adapted according to the installation location. The built-in light sensor provides adjustable 3–2000 LUX ambient-light control, while the TIME adjustment allows the load-on duration to be configured from 10 seconds ±3 seconds up to 15 minutes ±2 minutes . ⭐ Key Features ✔ 5.8GHz CW Microwave Radar Technology ✔ 360° Ceiling-Mounted Detection ✔ 180° Wall-Mounted Detection ✔ Adjustable 3–10m Detection Distance ✔ Adjustable Sensitivity ✔ Adjustable 3–2000 LUX Ambient Light ✔ Adjustable 10 Seconds–15 Minutes Time Delay ✔ 800W Incandescent Lamp Rated Load ✔ 200W Energy-Saving Lamp Rated Load ✔ Automatic Day & Night Identification ✔ Low 0.9W Power Consumption ✔ AC 220–240V Operation ✔ Detection Through Doors, Glass Panes & Thin Walls 📡 Advanced 5.8GHz Microwave Radar Detection The QS/M5B uses a 5.8GHz CW radar system in the ISM band to detect human movement. When a person enters the detection field, the sensor activates the connected load automatically. According to the manual, detection is possible through doors, panes of glass, or thin walls , providing flexible installation possibilities. 🎯 Adjustable Detection Sensitivity The SENS control allows the detection distance to be adjusted according to the application. At low sensitivity, the detection distance can be approximately 1m radius , while high sensitivity can provide detection up to 10m radius . This makes the sensor suitable for both smaller areas and larger rooms where a wider detection field is required. 🌙 Automatic Day & Night Detection The built-in LUX control allows the sensor to identify ambient-light conditions. The ambient-light adjustment range is 3–2000 LUX . At the maximum SUN position, the sensor can operate during both daytime and nighttime. At the minimum 3 LUX position, it operates when ambient light is below approximately 3 LUX. ⏱ Adjustable Time Delay The TIME control allows the load operating duration to be adjusted according to the application. The minimum time delay is 10 seconds ±3 seconds , while the maximum is 15 minutes ±2 minutes . The time delay is continuously extended when another motion signal is detected. This allows the connected lighting to remain ON while movement continues within the detection area. ⚡ Energy-Saving Automatic Lighting The sensor automatically activates the connected load when motion is detected and stops the load after the selected delay when no further detection occurs. This automatic operation helps reduce unnecessary lighting usage. 🔧 Ceiling & Wall Installation The QS/M5B supports both ceiling-mounted and wall-mounted applications . The manual specifies a recommended installation height of 1.5–3.5 metres . The wiring diagram in the manual shows N and L connected to the power supply , while A and N are connected to the load . 🧪 Easy Testing & Setup For testing, the manual recommends setting the LUX knob to maximum, TIME knob to minimum, and SENS knob to maximum . After switching on the power, the light turns on and then automatically turns off after approximately 5–30 seconds during the initial test sequence. When testing during daylight, the manual instructs users to turn the LUX knob to the SUN position. 🏢 Recommended Applications Rooms Corridors Hallways Entrances Commercial Areas Automatic Lighting Systems Ceiling-Mounted Lighting Wall-Mounted Lighting ⚠️ Installation Precautions Installation should be carried out by an electrician or experienced person. Do not install the sensor where obstacles interfere with the detection window. Avoid installation near areas with significant air-temperature changes, such as air conditioners or central heating. Do not open the sensor housing after installation in case of a fault. The manual recommends adding a 6A safety device such as a fuse or safety tube during installation. It belongs to the Microwave Sensor category.

What is the warranty on the 5.8GHz Microwave Radar Motion Sensor Switch, Multi-Mount 360°/180°, 1-8m, 300W, Adjustable Delay, AC 220-240V?

5.8GHz Microwave Radar Motion Sensor Switch, Multi-Mount 360°/180°, 1-8m, 300W, Adjustable Delay, AC 220-240V carries 18 Months Replacement Warranty Against Manufacturing defects, against manufacturing defects.

How do I buy the 5.8GHz Microwave Radar Motion Sensor Switch, Multi-Mount 360°/180°, 1-8m, 300W, Adjustable Delay, AC 220-240V for my business?

Quick Sense Innovations Private Limited supplies this product to registered businesses in India. Sign in to QuickSense to view pricing and place an order, or apply for a business account. Every order is invoiced with GST.

What is the SKU / model number of the 5.8GHz Microwave Radar Motion Sensor Switch, Multi-Mount 360°/180°, 1-8m, 300W, Adjustable Delay, AC 220-240V?

The SKU is QS/M5B-ST/WB.